Kingston 4GB 1600MHz DDR3 Non-ECC CL11 DIMM SR x8 STD Height 30mm
by Kingston Technology Company
Our Price: $24.29
Condition: New
Out of Stock.
Product Information
Manufacturer Part Number: KVR16N11S8H/4
Shipping Weight: 0.05 lbs
Description
This document describes ValueRAM's 512M x 64-bit (4GB) DDR3-1600 CL11 SDRAM (Synchronous DRAM) 1Rx8, memory module, based on eight 512M x 8-bit FBGA components. The SPD is programmed to JEDEC standard latency DDR3-1600 timing of 11-11-11 at 1.5V. This 240-pin DIMM uses gold contact fingers. The electrical and mechanical specifications are as follows:
Key Features:
• JEDEC standard 1.5V (1.425V ~1.575V) Power Supply
• VDDQ = 1.5V (1.425V ~ 1.575V)
• 800MHz fCK for 1600Mb/sec/pin
• 8 independent internal bank
• Programmable CAS Latency: 11, 10, 9, 8, 7, 6
• Programmable Additive Latency: 0, CL - 2, or CL - 1 clock
• 8-bit pre-fetch
• Burst Length: 8 (Interleave without any limit, sequential with starting address “000” only), 4 with tCCD = 4 which does not allow seamless read or write [either on the fly using A12 or MRS]
• Bi-directional Differential Data Strobe
• Internal(self) calibration : Internal self calibration through ZQ pin (RZQ : 240 ohm ± 1%)
• On Die Termination using ODT pin
• Average Refresh Period 7.8us at lower than TCASE 85°C, 3.9us at 85°C < TCASE < 95°C
• Asynchronous Reset
• PCB : Height 1.180” (30.00mm), single sided component
Product Details
Product Type: RAM Module
Product Family: ValueRAM
Memory Technology: DDR3 SDRAM
Memory Size: 4 GB
Form Factor: DIMM
Memory Speed: 1600 MHz
Error Checking: Non-ECC
Number of Pins: 240-pin
Signal Processing: Unbuffered
Green Compliant: Yes
Green Compliance Certificate/Authority: REACH
Memory Standard: DDR3-1600/PC3-12800
Width: 1.2"
CAS Latency: CL11
Product Line: ValueRAM
Manufacturer Website Address: www.kingston.com
Standard Warranty: Lifetime
Memory Voltage: 1.50 V
Packaged Quantity: 1