EZ Fit Trio 3x2.5? SSD HDD

The EZ-FIT Trio MB610SP is the first 2.5” SSD bracket that converts a single internal 3.5” hard drive bay into 3 x 2.5” SSD or HDD slots. With the EZ-FIT Trio SSD bracket’s tool-less Slim-U drive tray, you can easily add and remove drives without using tools or screws. The Slim-U drive tray is compatible with 5mm, 7mm, 9.5mm, 12.5mm and 15mm height 2.5” SSD or HDD which allow you mix and match the SSD or HDD with different drive height to create your 2.5” storage array. The EZ-FIT Trio MB610SP is a perfect SSD / HDD bracket for any system where multiple 2.5” drive slots are not desirable. brbr bEffortless Installation with Slim-U Tray/bbrThe EZ-FIT Trio uses our latest drive tray system called Slim-U, a light weight yet sturdy drive tray that supports tool-less drive installation. With Slim-U tray system, the drive installation can’t be easier, simply align the four screw holes of your 2.5” drive with the built-in screws on the Slim-U tray, and then insert the Slim-U tray into the bracket, connect the power and data cables to the drive and you are all set! To remove the drive, just open the side panel of the case, unplug the cables from your drive and then pull the Slim-U tray out from the bracket. brThe Slim-U tray acts as a drive stabilizer that secures the drive in place and provides shock absorption and anti-vibration properties – great for protecting your drives against impact. The Slim-U tray is compatible with 2.5” hard drive or SSD ranging from 5 to 15mm height. The EZ-FIT Trio fits up to three 2.5” SSD / HDD when the drive height is 7mm or smaller, and it supports up to two drives when the drive height is 9.5mm or greater. brbr bBrilliant Design /bbrSimple design does not mean simple to design. At ICY DOCK, we have spent countless hours perfecting our SSD bracket, allowing users to maximize their storage space while providing great user experience to its users. brbr